Kelsey Hayes Calipers
4 posters
Page 1 of 1
Kelsey Hayes Calipers
Guys, I am converting from drums to KH discs on my 68 Cuda, I took a Duster apart years ago and saved all the brake parts,
well !!! I can't seem to find the 4 piston calipers, was going to rebuild them or try to rebuild them, just can't find them.
Need to find a set to rebuild or a good set, what you guys got to help me out, yes I will likely find the others a day after I buy a set.
Thanks for all your help, Dave
well !!! I can't seem to find the 4 piston calipers, was going to rebuild them or try to rebuild them, just can't find them.
Need to find a set to rebuild or a good set, what you guys got to help me out, yes I will likely find the others a day after I buy a set.
Thanks for all your help, Dave
68cudamouse- Posts : 23
Join date : 2015-04-05
Location : Oakwood Ont.
Re: Kelsey Hayes Calipers
When mine weren't rebuildable (70 Duster) I got some calipers from Rock auto. I think back 8 years ago they cost me 150 each as I had no core to send back. I did find some on Ebay but they wanted 150 that I had to rebuild and no guarantee they could be rebuilt.
When I did my Demon I went with an SSBC brake kit as they were just as cheap as trying to buy new parts for rotors, calipers and disc's.
Good luck eh
When I did my Demon I went with an SSBC brake kit as they were just as cheap as trying to buy new parts for rotors, calipers and disc's.
Good luck eh
_________________
65 Cuda, 71 Demon, 74 Duster, 89 S60 Shadow, 96 LHS, 12 Ram, 13 SRT8
Keith Mopar- Posts : 1444
Join date : 2015-01-20
Age : 65
Location : Calgary AB
Re: Kelsey Hayes Calipers
Hey buddy, I have a set of calipers 4 ya. Kim
oldkimmer- Posts : 10
Join date : 2015-03-01
Re: Kelsey Hayes Calipers
Thanks Kimmer, Haven't been here for awhile, I got a set of calipers from a guy on A-bodies.
Thanks again.
Thanks again.
68cudamouse- Posts : 23
Join date : 2015-04-05
Location : Oakwood Ont.
Re: Kelsey Hayes Calipers
Are you done with this build? Have you managed to find the parts that you need?
Miles_Ha11- Posts : 35
Join date : 2020-10-09
Re: Kelsey Hayes Calipers
Hi Mike, not done but have all parts but the proportioning valve and a new master cylinder.
68cudamouse- Posts : 23
Join date : 2015-04-05
Location : Oakwood Ont.
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum