Re: Good Morning Thread

by **smoken340** Tue Nov 01, 2016 8:16 am

Ragtacker wrote:thats a great plan Dan

Just looking ahead, because I've sort of been in the sell mind set for some time now. In case the next time the thought comes to me and I get serious about selling then I want to be ready.

by blown motor Tue Nov 01, 2016 7:23 pm

Not sure how high it got today but it may have reached 20!! Really wanted to get the car out again but have to finish getting crops off first.

by blown motor Tue Nov 01, 2016 7:24 pm

Guelph would work sometime Dan. Maybe next spring.

by **Keith Mopar** Wed Nov 02, 2016 7:32 am

Good morning guys, a high of 14 today so not to bad out.
I wish it was 20 like you guys have it, we seem to of had quit a cool fall here.

by Ragtacker Wed Nov 02, 2016 7:47 am

Good morning 10 rain wind may clear up for the afternoon. did you see the news from Sema? Factory Crate Hemi`s ready to roll right our of the crate hmmmmmmmmmmmm
Have a great day

by JGL Wed Nov 02, 2016 9:26 am

Good afternoon, was 5 this morning but now 9 plus we did see the sun for a while. Getting the shrubs ready for winter.
Have a great day!

by **smoken340** Wed Nov 02, 2016 1:06 pm

blown motor wrote:Guelph would work sometime Dan. Maybe next spring.

That would be a good way to blow the cobb webs out of the Duster.

by **smoken340** Wed Nov 02, 2016 1:10 pm

Very mild 19 today, but we got some light off and on showers as well.
Keith, +14 is still way better than -14, so take it while you can get it.
It'll all come to an end, much quicker than we'd like.

by blown motor Wed Nov 02, 2016 7:00 pm

Booked flight tickets today for myself and a couple friends to go the Mecum auction in Kissimmee FL in January. Woohoo!!

by Ragtacker Wed Nov 02, 2016 7:10 pm

That will be a great trip

by JGL Thu Nov 03, 2016 5:07 am

Good morning, more tasks for the outside, no sun, cloudy but no rain, should wrap most things up today. Already up to 7 this morning and going up to 10-12 region.
Have a great day all.

by **smoken340** Thu Nov 03, 2016 5:28 am

blown motor wrote:Booked flight tickets today for myself and a couple friends to go the Mecum auction in Kissimmee FL in January. Woohoo!!

Do you Plan on buying something ?

by **smoken340** Thu Nov 03, 2016 5:31 am

Good morning all rain, rain and more rain, oh well better than snow. Still going to reach a high of 17. Feeling rather poorly today, so I think it's just going to be an R&R day.

by Ragtacker Thu Nov 03, 2016 5:40 am

Good morning 6 ,rain wind and sun today.
Have a great day

by blown motor Thu Nov 03, 2016 5:47 am

smoken340 wrote:
blown motor wrote:Booked flight tickets today for myself and a couple friends to go the Mecum auction in Kissimmee FL in January. Woohoo!!
Do you Plan on buying something ?

Beer.

by **Keith Mopar** Thu Nov 03, 2016 9:17 am

Beer, what a great idea. I go Mexico for beer all the time.

Well another so,so day here, high of 15 and sunny so don't want to complain knowing it could be worse, going to prepare to put the motor in the Cuda today, see what I need and want to try to bolt up the original 65 trans to my crate 360.

by **smoken340** Thu Nov 03, 2016 9:24 am

Keith Mopar wrote:Well another so,so day here, high of 15 and sunny so don't want to complain knowing it could be worse, going to prepare to put the motor in the Cuda today, see what I need and want to try to bolt up the original 65 trans to my crate 360.

Good luck with that, Keith.

by JGL Thu Nov 03, 2016 11:05 am

Sometimes the old and new bolt pattern don't match up, but then again sometimes they do.

by **Keith Mopar** Thu Nov 03, 2016 12:08 pm

smoken340 wrote:Good luck with that, Keith.

Yea I tried to bolt up the trans and it wouldn't quit go up all the way so pulled it apart and just found out that the crank is not drilled for the manual trans. I have a 73 340 bell housing with matching clutch and pressure plate the 65 trans and a 360 crate.

So far JG all bolts line up but won't know for sure until I get the trans to bolt up properly. Might be lucky that way, we'll see.

by **smoken340** Thu Nov 03, 2016 12:32 pm

Keith Mopar wrote:
smoken340 wrote:Good luck with that, Keith.
Yea I tried to bolt up the trans and it wouldn't quit go up all the way so pulled it apart and just found out that the crank is not drilled for the manual trans.

So are you going to cut the output shaft or drill the crank ???

by **Keith Mopar** Thu Nov 03, 2016 3:37 pm

Cut for sure, just bolted it back up loosely and there is a 1/2 gap from trans to bell housing so I'm thinking I will cut off 5/8 to make sure I have clearance.
One thing I realized today is the 833 sure has gotten a lot heavier as it sat for the last 5 years.

by JGL Thu Nov 03, 2016 6:07 pm

Hey Keith I bet the trans did not gain any weight, your still just a young pup, well maybe not a young pup but not an old hound dog either. Could be something else though...

by JGL Fri Nov 04, 2016 5:32 am

Good morning Canadians, just another crappy day with damp, rain and low temps. 6 to start and a high of 7, yeah that 7 is no mistake! Did most seasonal outdoor chores yesterday but today well...
Have a great day all.

by blown motor Fri Nov 04, 2016 5:35 am

It won't hurt the fields to dry up for another day and the forecast for the next week is great so I think I'll take the Challenger out for a run today. I haven't had it out in over a month.

by Ragtacker Fri Nov 04, 2016 5:55 am

Good morning 6 and clear at the moment but should have rain by the afternoon and wind and rain all weekend. Replacing speedo gear and cable this weekend. Have a 67 Dart coming in for full upholstery in two weeks, can`t wait I am getting tired of yachts for now.

by Sponsored content