Canadian line and tube

I would like some A body factory bent tranny lines i guess these guys are no longer in business in BC any where else in Canada to order from.

The cheapest way out is to bend them yourself like I did, but that does not give you an original looking job and they are not that easy to bend so they will work properly and of course everything is a tight fit on the A-bodies. Maybe ask your local transmission shop, he might be able to help.

I talk to those guys every year at Moparfest and Indy swap meet.
Inline Tube, is the American company, they have been having problems for a few years with their Canadian rep./distributor, I wouldn't be surprised if they closed it.
Give them a call and see what's up, http://www.inlinetube.com/.
Worst case scenario, I could pick that up for you when I'm in Indy, then ship them to you from Ontario.

Thanks Gazoo when is Indy?

Was looking and i think something like a set from a big block 71 road runner looks like they would work.

Grumpy427 wrote:Thanks Gazoo when is Indy?

Indy is the first weekend in March, 5th and 6th.

Grumpy427 wrote:Was looking and i think something like a set from a big block 71 road runner looks like they would work.

Except for the length.

length in my friend if it goes past the rad support all the better, can bend them to meet the cooler, less fittings. Be nice to do it all in one piece.

Mine is all in 1 piece just had to use patience in those close quarter places and copied off the original. Used a pulley or pipe or something round to bend the pipe the way it was supposed to be and did it all with no kinks, 1 for the inlet and 1 for the outlet.

I can get a set here local or 2.5 hrs away for $74.00 going to cost me at least that has they are $40 USD plus exchange and shipping.

$40 USD+ shipping and you would be in the $90 CDN range.

Grumpy427 wrote:I can get a set here local or 2.5 hrs away for $74.00 going to cost me at least that has they are $40 USD plus exchange and shipping.

With the restoration that you are doing to your car. I'd defiantly go with inline tube, nobody makes anything as close to stock, as they do.

RPM reproductions in Saskatoon is who i will go through, i am sure they all get it from the same supplier in the end.

National Moparts in Ontario sells them

Thanks everyone.