Polly torsion bar dust boots.

View previous topic View next topic Go down

Polly torsion bar dust boots.

Post by Grumpy427 on Wed Sep 09, 2015 9:39 am

I just installed mine this morning with a 1-1/16 deep socket a bench vice and a heat gun. if you ever do this let me know i will save you time and grief.

Grumpy427

Posts : 749
Join date : 2015-01-31
Age : 53
Location : Regina Saskatchewan

Back to top Go down

Re: Polly torsion bar dust boots.

Post by Keith Mopar on Wed Sep 09, 2015 10:45 am

Thanks for the tip, I never used mine and just put some stock type ones on. Once I slid them on after a bit of driving they would pop off, and what a pain in the butt to change them back. I never thought of the heat gun.
Did you do this just to stretch them a bit?

_________________
65 Cuda, 71 Demon, 74 Duster, 89 S60 Shadow, 96 LHS, 12 Ram, 13 SRT8

Keith Mopar

Posts : 752
Join date : 2015-01-20
Age : 57
Location : Calgary AB

Back to top Go down

Re: Polly torsion bar dust boots.

Post by Grumpy427 on Wed Sep 09, 2015 12:48 pm

To stretch them and slide them onto the deep socket then put the socket against the torsion bar and very quickly slide it onto the torsion bar. If your too slow or miss your back to the vice.

Grumpy427

Posts : 749
Join date : 2015-01-31
Age : 53
Location : Regina Saskatchewan

Back to top Go down

Re: Polly torsion bar dust boots.

Post by Sponsored content Today at 8:38 pm


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum